EE6601 SOLID STATE DRIVES syllabus-subject-notes-pevious-year-questions-papers-bank
OBJECTIVES:
To understand steady state operation and transient dynamics of a motor load system.
To study and analyze the operation of the converter/chopper fed dc drive, both qualitatively and
quantitatively.
To study and understand the operation and performance of AC motor drives.
To analyze and design the current and speed controllers for a closed loop solid state DC motor
drive.
UNIT I DRIVE CHARACTERISTICS 9
Electric drive – Equations governing motor load dynamics – steady state stability – multi quadrant
Dynamics: acceleration, deceleration, starting & stopping – typical load torque characteristics –
Selection of motor.
UNIT II CONVERTER / CHOPPER FED DC MOTOR DRIVE 9
Steady state analysis of the single and three phase converter fed separately excited DC motor
drive–continuous and discontinuous conduction– Time ratio and current limit control – 4 quadrant
operation of converter / chopper fed drive.
UNIT III INDUCTION MOTOR DRIVES 9
Stator voltage control–energy efficient drive–v/f control–constant airgap flux–field weakening mode – voltage / current fed inverter – closed loop control.
UNIT IV SYNCHRONOUS MOTOR DRIVES 9
V/f control and self control of synchronous motor: Margin angle control and power factor control –
permanent magnet synchronous motor.
UNIT V DESIGN OF CONTROLLERS FOR DRIVES 9
Transfer function for DC motor / load and converter – closed loop control with Current and speed
feedback–armature voltage control and field weakening mode – Design of controllers; current
controller and speed controller- converter selection and characteristics.
OUTCOMES:
Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory
control theory and apply them to electrical engineering problems.
TEXT BOOKS:
1. Gopal K.Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 1992.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Prentice Hall of
India, 2001.
REFERENCES:
1. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,” Elsevier
2012.
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press(Taylor and Francis Group),
2013.
3. S.K.Pillai, A First course on Electrical Drives, Wiley Eastern Limited, 1993.
4. S. Sivanagaraju, M. Balasubba Reddy, A. Mallikarjuna Prasad “Power semiconductor drives”
PHI, 5th printing, 2013.
5. N.K.De., P.K.SEN”Electric drives” PHI, 2012.
6. Vedam Subramanyam, ”Thyristor Control of Electric Drives”, Tata McGraw Hill, 2007.
OBJECTIVES:
To understand steady state operation and transient dynamics of a motor load system.
To study and analyze the operation of the converter/chopper fed dc drive, both qualitatively and
quantitatively.
To study and understand the operation and performance of AC motor drives.
To analyze and design the current and speed controllers for a closed loop solid state DC motor
drive.
UNIT I DRIVE CHARACTERISTICS 9
Electric drive – Equations governing motor load dynamics – steady state stability – multi quadrant
Dynamics: acceleration, deceleration, starting & stopping – typical load torque characteristics –
Selection of motor.
UNIT II CONVERTER / CHOPPER FED DC MOTOR DRIVE 9
Steady state analysis of the single and three phase converter fed separately excited DC motor
drive–continuous and discontinuous conduction– Time ratio and current limit control – 4 quadrant
operation of converter / chopper fed drive.
UNIT III INDUCTION MOTOR DRIVES 9
Stator voltage control–energy efficient drive–v/f control–constant airgap flux–field weakening mode – voltage / current fed inverter – closed loop control.
UNIT IV SYNCHRONOUS MOTOR DRIVES 9
V/f control and self control of synchronous motor: Margin angle control and power factor control –
permanent magnet synchronous motor.
UNIT V DESIGN OF CONTROLLERS FOR DRIVES 9
Transfer function for DC motor / load and converter – closed loop control with Current and speed
feedback–armature voltage control and field weakening mode – Design of controllers; current
controller and speed controller- converter selection and characteristics.
OUTCOMES:
Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory
control theory and apply them to electrical engineering problems.
TEXT BOOKS:
1. Gopal K.Dubey, Fundamentals of Electrical Drives, Narosa Publishing House, 1992.
2. Bimal K.Bose. Modern Power Electronics and AC Drives, Pearson Education, 2002.
3. R.Krishnan, Electric Motor & Drives: Modeling, Analysis and Control, Prentice Hall of
India, 2001.
REFERENCES:
1. John Hindmarsh and Alasdain Renfrew, “Electrical Machines and Drives System,” Elsevier
2012.
2. Shaahin Felizadeh, “Electric Machines and Drives”, CRC Press(Taylor and Francis Group),
2013.
3. S.K.Pillai, A First course on Electrical Drives, Wiley Eastern Limited, 1993.
4. S. Sivanagaraju, M. Balasubba Reddy, A. Mallikarjuna Prasad “Power semiconductor drives”
PHI, 5th printing, 2013.
5. N.K.De., P.K.SEN”Electric drives” PHI, 2012.
6. Vedam Subramanyam, ”Thyristor Control of Electric Drives”, Tata McGraw Hill, 2007.
Titanium Spelting Ring For The US Navy SEALs - The
ReplyDeleteA titanium spelting ring for titanium max the titanium coating US babyliss nano titanium flat iron Navy titanium white acrylic paint SEALs! Made with steel steel, it fits in your titanium bar stock pocket.