CE6601 DESIGN OF REINFORCED CONCRETE & BRICK MASONRY STRUCTURES Syllabus Subject Notes and previous Year Questions Papers Bank
Design Of RC And Brick Masonry May 2013 Nov 2011 Nov 2012
OBJECTIVES:
To give an exposure to the design of continuous beams, slabs, staircases, walls and brick masonry structures and to introduce yield line theory.
UNIT I RETAINING WALLS 9 Design of Cantilever and Counterfort Retaining walls UNIT II WATER TANKS 9 Design of rectangular and circular water tanks both below and above ground level - Design of circular slab.
UNIT III SELECTED TOPICS 9 Design of staircases (ordinary and doglegged) – Design of flat slabs – Principles of design of mat foundation, box culvert and road bridges
UNIT IV YIELD LINE THEORY 9 Assumptions - Characteristics of yield line - Determination of collapse load / plastic moment - Application of virtual work method - square, rectangular, circular and triangular slabs - Design problems
UNIT V BRICK MASONRY 9 Introduction, Classification of walls, Lateral supports and stability, effective height of wall and columns, effective length of walls, design loads, load dispersion, permissible stresses, design of axially and eccentrically loaded brick walls
OUTCOMES:
The student shall have a comprehensive design knowledge related to various structural systems.
TEXT BOOKS: 1. Gambhir.M.L., "Design of Reinforced Concrete Structures", Prentice Hall of India Private Limited, 2012. 2. Dayaratnam, P., “Brick and Reinforced Brick Structures”, Oxford & IBH Publishing House, 1997 3. Punmia B.C, Ashok Kumar Jain, Arun K.Jain, "R.C.C. Designs Reinforced Concrete Structures", Laxmi Publications Pvt. Ltd., New Delhi, 2006. 4. Varghese.P.C., "Advanced Reinforced Concrete Design", Prentice Hall of India Pvt. Ltd., New Delhi, 2012.
REFERENCES:
1. Mallick, D.K. and Gupta A.P., “Reinforced Concrete”, Oxford and IBH Publishing Company,1997
2. Syal, I.C. and Goel, A.K., “Reinforced Concrete Structures”, A.H. Wheelers & Co. Pvt. Ltd., 1998
3. Ram Chandra.N. and Virendra Gehlot, “Limit State Design”, Standard Book House, 2004.
4. Subramanian. N., "Design of Reinforced Concrete Structures", Oxford University, New Delhi, 2013. 5. IS456:2000, Code of practice for Plain and Reinforced Concrete, Bureau of Indian Standards, New Delhi, 2007 6. IS1905:1987, Code of Practice for Structural use of Unreinforced Masonry Bureau of Indian Standards, New Delhi, 2002
Design Of RC And Brick Masonry May 2013 Nov 2011 Nov 2012
CE6601 DESIGN OF REINFORCED CONCRETE & BRICK MASONRY STRUCTURES Syllabus
OBJECTIVES:
To give an exposure to the design of continuous beams, slabs, staircases, walls and brick masonry structures and to introduce yield line theory.
UNIT I RETAINING WALLS 9 Design of Cantilever and Counterfort Retaining walls UNIT II WATER TANKS 9 Design of rectangular and circular water tanks both below and above ground level - Design of circular slab.
UNIT III SELECTED TOPICS 9 Design of staircases (ordinary and doglegged) – Design of flat slabs – Principles of design of mat foundation, box culvert and road bridges
UNIT IV YIELD LINE THEORY 9 Assumptions - Characteristics of yield line - Determination of collapse load / plastic moment - Application of virtual work method - square, rectangular, circular and triangular slabs - Design problems
UNIT V BRICK MASONRY 9 Introduction, Classification of walls, Lateral supports and stability, effective height of wall and columns, effective length of walls, design loads, load dispersion, permissible stresses, design of axially and eccentrically loaded brick walls
OUTCOMES:
The student shall have a comprehensive design knowledge related to various structural systems.
TEXT BOOKS: 1. Gambhir.M.L., "Design of Reinforced Concrete Structures", Prentice Hall of India Private Limited, 2012. 2. Dayaratnam, P., “Brick and Reinforced Brick Structures”, Oxford & IBH Publishing House, 1997 3. Punmia B.C, Ashok Kumar Jain, Arun K.Jain, "R.C.C. Designs Reinforced Concrete Structures", Laxmi Publications Pvt. Ltd., New Delhi, 2006. 4. Varghese.P.C., "Advanced Reinforced Concrete Design", Prentice Hall of India Pvt. Ltd., New Delhi, 2012.
REFERENCES:
1. Mallick, D.K. and Gupta A.P., “Reinforced Concrete”, Oxford and IBH Publishing Company,1997
2. Syal, I.C. and Goel, A.K., “Reinforced Concrete Structures”, A.H. Wheelers & Co. Pvt. Ltd., 1998
3. Ram Chandra.N. and Virendra Gehlot, “Limit State Design”, Standard Book House, 2004.
4. Subramanian. N., "Design of Reinforced Concrete Structures", Oxford University, New Delhi, 2013. 5. IS456:2000, Code of practice for Plain and Reinforced Concrete, Bureau of Indian Standards, New Delhi, 2007 6. IS1905:1987, Code of Practice for Structural use of Unreinforced Masonry Bureau of Indian Standards, New Delhi, 2002
No comments:
Post a Comment